English 
English  |
| Quantity: | |
|---|---|
This type of machine works by hydraulic power, which could produce max. 25 Liter tanks. This machine equipped with accumulated die head, parison controller, every hour could produce 40 pieces. The machine controls by PLC system, operator could control machine by touch screen. The HDPE/PP material could be used by this machine. The storage tank, oil tank, water tanks and chemical tanks could be produced by this 25L blow molding machine.
Video Demo:
Name | Parameter |
Max. Product Volume | 25L |
Work Station | Single |
Raw Material: | HDPE、PP、ABS、PA etc. |
Extruder Electric Motor Power | 30kw |
Oil Pump Motor Power | 18.5kw |
Screw Rod Dia. | 80mm |
Screw Rod Length/Dia. | 25/1 |
Screw Rod Rotation Speed | 10-80rpm/min |
Plasticizing Capacity（HDPE） | 80-100 kg/hr |
Production Capacity（free load） | 200pc/hr |
Die Max. Dia. | 280mm |
Clamping force | 100KN |
Installation Capacity | 60kw |
Average Energy Consumption | 40kw |
Machine Outside Dimension | 3.5×2.2×2.8m |
Machine Weight | 7T |
Machine Photo:
This blow molding machine can produce 25 liter plastic drums ,jerry cans. Also can with cladding layer,liquid view line. This machine is full hydraulic machine with auto deflashing,single head single station.
After Sales Service: buyer should pay for all fees for flight, accommodation and etc, seller could come to buyers’ factory to install and adjust machine.
Warrenty: We warranty the quality of this machine for 12 months, if there is any problem with the machine, or any main parts are broken, we will repair it or replace new for free.
The below tanks could be produced:
This type of machine works by hydraulic power, which could produce max. 25 Liter tanks. This machine equipped with accumulated die head, parison controller, every hour could produce 40 pieces. The machine controls by PLC system, operator could control machine by touch screen. The HDPE/PP material could be used by this machine. The storage tank, oil tank, water tanks and chemical tanks could be produced by this 25L blow molding machine.
Video Demo:
Name | Parameter |
Max. Product Volume | 25L |
Work Station | Single |
Raw Material: | HDPE、PP、ABS、PA etc. |
Extruder Electric Motor Power | 30kw |
Oil Pump Motor Power | 18.5kw |
Screw Rod Dia. | 80mm |
Screw Rod Length/Dia. | 25/1 |
Screw Rod Rotation Speed | 10-80rpm/min |
Plasticizing Capacity（HDPE） | 80-100 kg/hr |
Production Capacity（free load） | 200pc/hr |
Die Max. Dia. | 280mm |
Clamping force | 100KN |
Installation Capacity | 60kw |
Average Energy Consumption | 40kw |
Machine Outside Dimension | 3.5×2.2×2.8m |
Machine Weight | 7T |
Machine Photo:
This blow molding machine can produce 25 liter plastic drums ,jerry cans. Also can with cladding layer,liquid view line. This machine is full hydraulic machine with auto deflashing,single head single station.
After Sales Service: buyer should pay for all fees for flight, accommodation and etc, seller could come to buyers’ factory to install and adjust machine.
Warrenty: We warranty the quality of this machine for 12 months, if there is any problem with the machine, or any main parts are broken, we will repair it or replace new for free.
The below tanks could be produced:
