1. Personnel without professional training shall not operate the blow molding machine without authorization.
2. Before the machine is turned on, open the cooling water valve to ensure that the cooling water channel is unblocked; turn on the internal power supply, start the oil pump motor; turn on the heating switch, turn on the power supply, set the temperature value and temperature control process according to the production requirements of the product; Check the thickness of the current in the ammeter to judge the quality of the heating coil; such as a machine that has not been used for a long time, after starting the oil pump, it needs to run for a few minutes without load.
3. During the test machine process, the manual, semi-automatic, and fully automatic states should be carried out in sequence to ensure that the machines in different production states can run smoothly; check whether all the components and bolts are fastened; if an abnormality occurs, immediately Stop for inspection and maintenance, and then restart the test machine after troubleshooting.
2. Precautions for the operation of hollow blow molding machine
1. The operator of the plastic extrusion blow molding machine needs to undergo certain professional operation training to avoid unnecessary damage during the operation.
2. When the blow molding machine is moving the mold, opening and closing the mold, the operator is forbidden to enter the safety door area to avoid being pinched or bumped; under normal production, do not pull the extruded blank by hand. Avoid being burned by high temperature materials and electric cutters or being pinched by the mold.
3. Once it occurs during the operation, in an emergency, quickly press the red emergency stop button to prevent accidents.
This is PLC type rotary blow molding machine, the machine operation and temperature are controlled by PLC system. This type machine could work more stable. Every hour could produce 3000 pieces ice lolly tubes.
This high speed rotary blow molding machine could produce 3L/ 5L/ 12L hollow bottles. Our machine advantages: 1, Energy saving, manpower saving: every year save around 200,000 RMB 2, High production: every machine could achieve 1-3 times higher production than normal hydraulic machine 3, Mold: compare with the same end product hydraulic machine, save mold cost around 50%; the internal part of the mold adopts high speed cooling system. 4, This machine equipped with high technology remote control system, which could achieve checking and maintain machines from far distance.
This type of machine is suitable to produce HDPE type bottles with cutting neck. For example milk bottles, yogurt bottles, etc. The advantage of this machine is that this type machine achieved full automatic process. Equipped with cutting system, customer could get final product out of machine directly.
wet wipe canister bottle blowing machine, double cavities, high production output; One hour produce 500 pieces for the canisters. This type machine could produce single or double die heads, double stations.